BROWN & SHARPE TESA RUGOSURF 10 Portable Surface Finish Instrument
Easy-to-Use surface roughness gage with a wide choice of accessories for measuring work pieces of many shapes and forms. Robust versatile and compact gauge unit designed for inspecting any work piece surface finish and capturing roughness parameter values. Wide variety of probes for the most varied applications. Possible tolerancing of each parameter available.
•Interchangeable probe, swivelling through to 90ş to let you measure even in hard-to-reach recesses.
•Extended autonomy. Can equally be connected to the mains adapter or the battery pack or direct use on a machine-tool.
•Value storage, output or transfer to a PC (up to 30 values).
•RS232 data output for full use and further storage of the measurement results.
•Automatic switch over to idle mode if left unused for 40 seconds, preserves the battery pack.
•Fast and easy analysis of the results obtained from the measured parameters with assigned tolerances.
| Technical Data | |
| Measured parameters: | |
| Calculated as per ISO 4287-1997/JIS B0601 | Ra - Rq (RMS) - Rt - Rz - Rc - Rsm - Rmr. |
| CNOMO | Pt - R - Rx - AR |
| Measuring spans: | 160µm (± 20µm and ± 80µm) |
| Resolution: | 0.01µm / 0.04µm |
| Cut-offs: | c=0.25-0.8-2.5mm. Choice between 2, 3, 4 or 5 cut-offs for the relevant measurement |
| Filter: | GAUSSAN according to ISO 11562 |
| Cut-off length lc: | Number of cut-offs x c (0.5 to 12.5mm) |
| Total length lc: | Number of cut-offs + 1 x c (0.75 to 15.0mm) |
| Measuring head: | 2 x positions (0 & 90°) |
| Inductive probe: | 5µm, 90° |
| Measuring force: | 0.75mN (ISO 3274) |
| Calibration function: | Using reference specimen Ra=2.97µm |
| RS 232 data output: | For data transmission to Rugosoft 10 software | Description | Part No. | EDP No. | | Rugosurf 10 | 06930010 | 23124 | | Rugosurf 10 Software with cable | 06960034 | 23126 |
Tesa Rugosurf 10 roughness gauge 06930010 delivered with the following standard accessories: Roughness standard, nominal value Ra = 2.97µm/117 µin Rechargeable battery, 8.4 v, 120v250 mAh, NICd or NiMH, PP3 format Standard probe, type SB10 Battery charger Adaptor for universal stand, 8mm diameter Positioning support     
Rapp Industrial Sales * 127 Main Street * Connoquenessing, Pa 16027 Phone 888-789-7277 * 724-789-7853 * Fax 724-789-7288 Email: sales @rappindustrialsales.com |
| Optional Probes | | |
| SB10 For regular surface finish and bores. External diameters >.4"/10mm and internal diameters from 25"/6mm. | 06960036 | 23128 |
| SB20 For slots with depths up to .0"/5mm max. | 06960037 | 23129 |
| SB30 For small bore with a 15"/4mm minimum diameter, .8"/20mm in depth. | 06960038 | 23130 |
| SB40 With a prismatic contact skid for measuring cables. External diameters >.04"/1mm. | 06960039 | 23131 |
| SB50 With front mounted contact skid for inspecting concave surfaces. Ideal for measuring through to 90° | 06960040 | 23132 |
